NSN 5305-01-383-3740
High Torque Screw
1.378 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, hole diameter: 0.076 inches .
Manufacturer part number NAS1154-17D for national stock number 5305013833740.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-383-3740.
-
MPN or Model
NAS1154-17D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
A3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
1.378 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Hole Diameter
0.076 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
5820 pounds per square inch -
Hole Configuration Style
Round -
Countersink Angle
99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1154 professional/industrial association standard
More from these suppliers
- 5940-00-923-4493 MPN NAS1745-4Conductor Splice
- 4920-01-532-5091 MPN NAS77A12-94Airc Sleeve Bushing
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-042-9478 MPN MS90725-90Hexagon Head Cap Screw
- 5305-00-051-2333 MPN MS51958-107Machine Screw
- 5305-00-058-0807 MPN NAS1101-04H5Machine Screw
- 5305-00-086-7865 MPN NAS1631C7Machine Screw
- 5305-00-137-3092 MPN MS24674-30Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-383-3740 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1154-17D | National Aerospace Standards |