NSN 5305-01-383-6097
High Torque Screw
Between 0.798 inches and 0.828 inches fastener length, flat countersunk head style, between 0.304 inches and 0.314 inches head diameter, grip diameter: between 0.3106 inches and 0.3112 inches .
Manufacturer part number NAS1205-7D for national stock number 5305013836097.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-383-6097.
-
MPN or Model
NAS1205-7D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 0.798 inches and 0.828 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.304 inches and 0.314 inches -
Grip Diameter
Between 0.3106 inches and 0.3112 inches -
Shank Unthreaded Hole Diameter
0.076 inches and 0.086 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.312 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
A24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.994 inches bearing surface of head -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-547-3388 MPN NAS77A12-018NPre Flanged Bushing
- 5305-00-008-2070 MPN NAS1133E12Close Tolerance Screw
- 5305-00-063-3507 MPN MS24693-S274Machine Screw
- 5305-00-115-9407 MPN NAS1100E06-70PMachine Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-225-8477 MPN MS24693-S146Machine Screw
- 5305-00-269-4215 MPN MS24694S157Machine Screw
- 5305-00-271-3493 MPN NAS220-31Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-383-6097 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1205-7D | National Aerospace Standards |
NAS1205-7D | National Aerospace Standards |
NAS1205-7D | National Aerospace Standards |
NAS1205-7D | National Aerospace Standards |
NAS1205-7D | National Aerospace Standards |