NSN 5305-01-389-8011
High Torque Screw
Between 0.998 inches and 1.026 inches fastener length, flat countersunk head style, 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS7503-11 for national stock number 5305013898011.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-389-8011.
-
MPN or Model
NAS7503-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.998 inches and 1.026 inches -
Head Style
Flat countersunk -
Head Diameter
0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf -
Specification Data
80205-nas7503 professional/industrial association standard
More from these suppliers
- 5935-01-559-5421 MPN MS17346R22C2PYElectrical Receptacle Connector
- 5940-01-630-1917 MPN NAS14941Lug Terminal
- 5935-01-669-1857 MPN 31Electrical Plug Connector
- 5305-00-003-9278 MPN NAS1221-4C42Machine Screw
- 5305-00-008-5896 MPN NAS1102E5-10Machine Screw
- 5305-00-052-5945 MPN MS35198-1Machine Screw
- 5305-00-052-9956 MPN MS24619-14Tapping Screw
- 5305-00-058-6611 MPN NAS662C2LLR7Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-389-8011 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7503-11 | National Aerospace Standards |