NSN 5305-01-394-2427
High Torque Screw
Between 2.221 inches and 2.241 inches fastener length, flat countersunk head style, between 0.2578 inches and 0.3047 inches head diameter, grip diameter: between 0.4990 inches and 0.4995 inches .
Manufacturer part number NAS1581K8T33 for national stock number 5305013942427.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-394-2427.
-
MPN or Model
NAS1581K8T33
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.768 inches -
Fastener Length
Between 2.221 inches and 2.241 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.2578 inches and 0.3047 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
Between 2.053 inches and 2.073 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4952 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-455-0005 MPN NAS1745-12Conductor Splice
- 5935-01-650-0947 MPN MS24266R14B12PElectrical Plug Connector
- 5305-00-052-5689 MPN NAS1352-08H6Socket Head Cap Screw
- 5305-00-121-8895 MPN MS27577-4-18Close Tolerance Screw
- 5305-00-145-0834 MPN NAS1635-04LN7Socket Head Cap Screw
- 5305-00-185-0720 MPN NAS1352-5-20Socket Head Cap Screw
- 5305-00-225-7776 MPN NAS1351C4-24Socket Head Cap Screw
- 5305-00-267-8974 MPN NASM90726Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-394-2427 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581K8T33 | National Aerospace Standards |