NSN 5305-01-395-3585
High Torque Screw
Between 0.543 inches and 0.563 inches fastener length, flat countersunk head style, between 0.456 inches and 0.508 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS7504-3 for national stock number 5305013953585.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-395-3585.
-
MPN or Model
NAS7504-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 0.543 inches and 0.563 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.456 inches and 0.508 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
80205-nas7504 professional/industrial association standard
More from these suppliers
- 1680-01-478-1737 MPN NAS43DD0-38FCAircr Sleeve Spacer
- 5305-00-003-6769 MPN MS24627-64Tapping Screw
- 5305-00-007-0287 MPN NAS1131E88PClose Tolerance Screw
- 5305-00-008-7856 MPN NAS1742C04-6USocket Head Cap Screw
- 5305-00-052-6908 MPN MS24629-4Tapping Screw
- 5305-00-054-9255 MPN MS51047-34Setscrew
- 5305-00-055-2569 MPN NAS1216-04-7Machine Screw
- 5305-00-057-0525 MPN MS51958-29Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-395-3585 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7504-3 | National Aerospace Standards |