NSN 5305-01-396-9652
High Torque Screw
0.943 inches fastener length, pan no. 2 head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.115 inches and 0.125 inches .
Manufacturer part number GB511GK3-8 for national stock number 5305013969652.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-396-9652.
-
MPN or Model
GB511GK3-8
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.443 inches -
Fastener Length
0.943 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.115 inches and 0.125 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-063-5057 MPN BACB30LK3U2Close Tolerance Screw
- 5305-01-539-5816 MPN 3M927-4L8Close Tolerance Screw
- 5306-00-288-2475 MPN VAL23033-9D30Shear Bolt
- 5306-00-324-7712 MPN VAL23033-7H28Close Tolerance Bolt
- 5306-00-443-6799 MPN STSBG002A04U018Shear Bolt
- 5306-00-881-0229 MPN VFK100G-09026Shear Bolt
- 5306-01-046-1185 MPN VAL23608-3-17Shoulder Bolt
- 5306-01-054-3415 MPN VCG0009-7-14Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-396-9652 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB511GK3-8 | Northrop Grumman Systems Corporation |
GB511GK3-8 | Sps Technologies, Llc |
VCL0011-3-8 | Valley-todeco, Inc. |
PBF1510-3-8 | Sps Technologies, Llc |
124537-3-8 | Sps Technologies, Llc |