NSN 5305-01-400-1779
High Torque Screw
Between 5.761 inches and 5.791 inches fastener length, pan head style, between 0.256 inches and 0.270 inches head diameter, head height: between 0.087 inches and 0.097 inches .
Manufacturer part number 3111124-1 for national stock number 5305014001779.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-400-1779.
-
MPN or Model
3111124-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.430 inches -
Fastener Length
Between 5.761 inches and 5.791 inches -
Head Style
Pan -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.087 inches and 0.097 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.138 inches -
Grip Length
5.346 inches -
Thready Qty Per Inch (tpi)
32 -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-451-5756 MPN 922450-1CElectrical Receptacle Connector
- 5930-00-459-0783 MPN 973920-1Rotary Switch
- 5935-00-471-4022 MPN 922412-23Electrical Receptacle Connector
- 5985-00-538-6017 MPN 650535Waveguide Assembly
- 5905-00-549-3696 MPN 4171786-19Nonprecision Nonwire Wound Variable Resistor
- 5930-00-620-6420 MPN 5021-37Rotary Switch
- 5950-00-646-1979 MPN 132673Radio Frequency Coil
- 5950-00-701-0026 MPN 872502Audio Frequency Transformer
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-400-1779 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3111124-1 | Raytheon Company |
3111124-1 | Raytheon Company |