NSN 5305-01-406-7904
High Torque Screw
Between 1.048 inches and 1.078 inches fastener length, flat countersunk head style, between 0.573 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number C7984-5-10R for national stock number 5305014067904.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-406-7904.
-
MPN or Model
C7984-5-10R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.413 inches and 0.463 inches -
Fastener Length
Between 1.048 inches and 1.078 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.573 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
81755-c7984-5-10r professional/industrial association specification
More from these suppliers
- 4820-00-104-8746 MPN C225-4Safety Relief Valve
- 4920-00-118-9305 MPN 12A0176-2Aircraft Maintenance Fixture
- 1680-00-402-6199 MPN 12M4654-11Lg Contr Latch Lock
- 1560-00-410-8995 MPN 12W861-14Aircraft Structural Component Support
- 4920-00-411-3106 MPN 12A3668-1Aircraft Maintenance Fixture
- 5975-00-438-4832 MPN C2086-8-4Electrical Conduit Coupling
- 1560-00-546-1686 MPN 12W9010-855Aircraft Structural Component Bracket
- 1560-00-811-5923 MPN 12W495-3Wing Pivot Panel
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-406-7904 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C7984-5-10R | Lockheed Martin Corporation |