NSN 5305-01-406-8674
High Torque Screw
Between 1.050 inches and 1.080 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1580A4T9Y for national stock number 5305014068674.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-406-8674.
-
MPN or Model
NAS1580A4T9Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 1.050 inches and 1.080 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580a4t9y professional/industrial association standard
More from these suppliers
- 5935-01-316-9334 MPN MS33688-28-21PElectrical Connector Insert
- 5940-01-413-3011 MPN NAS1063B219-222Terminal Board Marker Strip
- 5305-00-071-2089 MPN MS51957-89Machine Screw
- 5305-00-079-1749 MPN MS24694S29Machine Screw
- 5305-00-124-3778 MPN NAS1191-6P20Socket Head Cap Screw
- 5305-00-144-0356 MPN NAS1096-2-52Machine Screw
- 5305-00-151-6215 MPN NAS1218-06-4Machine Screw
- 5305-00-159-1432 MPN NAS1352-8-24PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-406-8674 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A4T9Y | National Aerospace Standards |