NSN 5305-01-410-7235
High Torque Screw
Between 1.319 inches and 1.369 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 3M1165-3-15F for national stock number 5305014107235.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-410-7235.
-
MPN or Model
3M1165-3-15F
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 1.319 inches and 1.369 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Surface Treatment
Aluminum and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-171-0555 MPN 11907-3L21-1Close Tolerance Screw
- 5305-01-462-7886 MPN 11827V6-18AClose Tolerance Screw
- 5305-01-473-8508 MPN 11853D3-4-7AClose Tolerance Screw
- 5305-01-500-8240 MPN 11825C3-5AClose Tolerance Screw
- 5305-01-512-8356 MPN 11845D3-8AFClose Tolerance Screw
- 5306-00-292-7047 MPN 11695A08U039Shear Bolt
- 5306-00-492-6982 MPN 11699A04U024Shear Bolt
- 5306-01-013-8281 MPN 11699A05U021Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-410-7235 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1165-3-15F | Boeing Company, The |
11843-3-15F | Reid Products Inc. |
3M1165-3-15F | Boeing Company, The |
11843-3-15F | Reid Products Inc. |
3M1165-3-15F | Boeing Company, The |
11843-3-15F | Reid Products Inc. |