NSN 5305-01-413-4583
High Torque Screw
Between 1.856 inches and 1.903 inches fastener length, flat countersunk head style, between 0.826 inches and 0.884 inches head diameter, grip diameter: between 0.4677 inches and 0.4682 inches .
Manufacturer part number 124379-7-29 for national stock number 5305014134583.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-413-4583.
-
MPN or Model
124379-7-29
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 1.856 inches and 1.903 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.826 inches and 0.884 inches -
Grip Diameter
Between 0.4677 inches and 0.4682 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.437 inches -
Grip Length
Between 1.803 inches and 1.823 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-3110 MPN LS15265V3-22Close Tolerance Screw
- 5305-00-522-9628 MPN ST3M454-4L10Close Tolerance Screw
- 5305-01-102-3613 MPN 3M938-3-3-5Close Tolerance Screw
- 5306-00-205-3700 MPN BACB30MF6-18Close Tolerance Bolt
- 5306-00-288-2227 MPN VAL23033-3-6Shear Bolt
- 5306-00-914-3866 MPN STSBG003A14U040Close Tolerance Bolt
- 5306-00-958-8618 MPN VFK100G-07022Shear Bolt
- 5306-01-052-4442 MPN VAL22034-18G134Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-413-4583 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
124379-7-29 | Sps Technologies, Llc |
GB510FG7-29 | Northrop Grumman Systems Corporation |
VCL0009-7-29 | Valley-todeco, Inc. |
PBF1475-7-29 | Sps Technologies, Llc |