NSN 5305-01-414-2182
High Torque Screw
Between 2.713 inches and 2.740 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.4677 inches and 0.4682 inches .
Manufacturer part number 124379-7-34 for national stock number 5305014142182.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-414-2182.
-
MPN or Model
124379-7-34
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 2.713 inches and 2.740 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.4677 inches and 0.4682 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.437 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Nickel alloy 718 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-049-4055 MPN BACB30LH3U24Close Tolerance Screw
- 5305-01-131-2934 MPN ST3M733-5L11Close Tolerance Screw
- 5305-01-172-8200 MPN HS4727-3-26Close Tolerance Screw
- 5305-01-462-2725 MPN 3M1169V3-9AClose Tolerance Screw
- 5305-01-600-3728 MPN 3M1277E5D17AMachine Screw
- 5306-01-025-6959 MPN VAL23029-4-3Close Tolerance Bolt
- 5306-01-045-6566 MPN VAL23608-4D8Shoulder Bolt
- 5306-01-052-7201 MPN ST3M453-5-12Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-414-2182 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
124379-7-34 | Sps Technologies, Llc |
GB510FG7-34 | Northrop Grumman Systems Corporation |
VCL0009-7-34 | Valley-todeco, Inc. |
PBF1475-7-34 | Sps Technologies, Llc |
GB510FG7-34 | Sps Technologies, Llc |