NSN 5305-01-417-9049
High Torque Screw
Between 0.455 inches and 0.485 inches fastener length, flat countersunk head style, between 0.293 inches and 0.301 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number TX102703-2A for national stock number 5305014179049.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-417-9049.
-
MPN or Model
TX102703-2A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 0.455 inches and 0.485 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.293 inches and 0.301 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Cross recess type iii -
Thread Diameter
0.190 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
2200 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2835 MPN LS15267V3-35Machine Screw
- 5305-01-412-6376 MPN LD111-0045-2414Close Tolerance Screw
- 5305-01-432-5894 MPN 3M1170D4-6AClose Tolerance Screw
- 5305-01-512-8356 MPN 3M1170C3-8AFClose Tolerance Screw
- 5305-01-629-0197 MPN BACS12GM3-24Machine Screw
- 5306-00-150-3569 MPN VCD0020-8-32Shear Bolt
- 5306-00-281-7468 MPN VAL23033-5D37Shear Bolt
- 5306-00-503-5721 MPN VAL23602-8D016Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-417-9049 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TX102703-2A | Sps Technologies Inc |
3M1170D3-2A | Boeing Company, The |
TX1027D3-2A | Sps Technologies, Llc |
TX1027D3-2A | Arconic Global Fasteners & Rings, |
HP1170D3-2A | Heartland Precision Fasteners, Inc. |
TX1027D3-2A | Sps Technologies, Llc |
TX1027D3-2A | Sps Technologies, Llc |
11825D3-2/11825D3-2A | Reid Products Inc. |
11845D3-2/11845D3-2A | Reid Products Inc. |
TX1027D3-2A | Hi-shear Corporation |
TX1027D3-2A | Sps Technologies, Llc |
TX1027D3-2A | Alcoa Global Fasteners, Inc. |
3M1170D3-2A | Viessmann Werke Gmbh & Co. |
TX1027D3-2A | Alcoa Fastening Systems |
TX1027D3-2A | Lisi Aerospace Canada Corp |
3M1170D3-2A | Huck International, Inc. |
3M1170D3-2A | Valley-todeco, Inc. |
3M1170D3-2A | B & B Specialties Inc. |
3M1170D3-2A | Houston Precision Fasteners I, Lp |
3M1170D3-2A | Fastener Innovation Technology, Inc. |
3M1170D3-2A | Reid Products Inc. |
3M1170D3-2A | West Coast Aerospace Inc |
TX1027D3-2A | Sps Technologies Inc |
10113805 | Nimikkeistokeskus Ncb Finland |
3M1170D3-2 | Sps Technologies, Llc |
TX1027D3-2 | Sps Technologies, Llc |
HP1170D3-2 | Heartland Precision Fasteners, Inc. |
TX1027D3-2A | Heartland Precision Fasteners, Inc. |
3M1170D3-2 | Sps Technologies, Llc |
TX1027D3-2 | Hi-shear Corporation |
3M1170D3-2 | Sps Technologies, Llc |
3M1170D3-2 | Boeing Company, The |