NSN 5305-01-420-5114
High Torque Screw
Between 2.410 inches and 2.440 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 03A161-4-32P for national stock number 5305014205114.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-420-5114.
-
MPN or Model
03A161-4-32P
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 2.410 inches and 2.440 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-01-414-1204 MPN BACB30JQ7-18Shoulder Screw
- 5305-01-476-0845 MPN BACS12CK06D14Machine Screw
- 5305-01-505-3997 MPN TX1024C3-2-7AClose Tolerance Screw
- 5306-01-013-8280 MPN STSBG003A04U010Shear Bolt
- 5306-01-044-0740 MPN VAL22034-8F90Shear Bolt
- 5306-01-053-6963 MPN BACB30LM6U10Shear Bolt
- 5306-01-142-2896 MPN VAL23608-5D74Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-420-5114 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A161-4-32P | Northrop Grumman Systems Corporation |
AIC4410-4-32P | Sps Technologies, Llc |
VCL0008-4-32P | Valley-todeco, Inc. |
X007-4-32P | Huck International, Inc. |
PBF1419-4-32P | Sps Technologies, Llc |
HR242-4-32P | Hi-shear Corporation |
123741-4-32P | Sps Technologies, Llc |
HR242-4-32P | Lisi Aerospace Canada Corp |
X007-4-32P | Huck Intl Inc |
SLB217-4-32P | Space-lok, Inc. |
SLB217-4-32P | Space-lok, Inc. |
03A161-4-32P | Northrop Grumman Systems Corporation |
VCL0008-4-32P | Valley-todeco, Inc. |
AIC4410-4-32P | Sps Technologies, Llc |
X007-4-32P | Huck International, Inc. |
PBF1419-4-32P | Sps Technologies, Llc |
HR242-4-32P | Hi-shear Corporation |
123741-4-32P | Sps Technologies, Llc |
HR242-4-32P | Lisi Aerospace Canada Corp |
SLB217-4-32P | Space-lok, Inc. |
X007-4-32P | Huck Intl Inc |