NSN 5305-01-420-6146
High Torque Screw
Between 2.808 inches and 2.838 inches fastener length, flat countersunk head style, between 0.280 inches and 0.337 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number NAS2832C40T for national stock number 5305014206146.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-420-6146.
-
MPN or Model
NAS2832C40T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 2.808 inches and 2.838 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.337 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Single Shear Strength
108000 pounds per square inch -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.164 inches -
Grip Length
Between 2.490 inches and 2.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5940-01-442-4218 MPN NAS1063A2-TB107DCTerminal Board Marker Strip
- 5305-00-007-9892 MPN NAS1102C04-12Machine Screw
- 5305-00-009-0517 MPN NAS1393E00-7Machine Screw
- 5305-00-038-2431 MPN NAS514P632-22BMachine Screw
- 5305-00-050-9218 MPN MS24678-51CSocket Head Cap Screw
- 5305-00-051-0227 MPN MS24693-C272Machine Screw
- 5305-00-058-5049 MPN MS24694S111Machine Screw
- 5305-00-067-3460 MPN NAS1352C5LN12Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-420-6146 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2832C40T | National Aerospace Standards |
NAS2832C40T | National Aerospace Standards |
NAS2832C40T | National Aerospace Standards |
NAS2832C40T | National Aerospace Standards |
NAS2832C40T | National Aerospace Standards |
NAS2832C40T | National Aerospace Standards |
NAS2832C40T | National Aerospace Standards |
NAS2832C40T | National Aerospace Standards |
NAS2832C40T | National Aerospace Standards |
NAS2832C40T | National Aerospace Standards |
NAS2832C40T | National Aerospace Standards |
NAS2832C40T | National Aerospace Standards |
NAS2832C40T | National Aerospace Standards |