NSN 5305-01-420-6725
High Torque Screw
Between 2.223 inches and 2.253 inches fastener length, pan no. 2 head style, between 0.360 inches and 0.374 inches head diameter, head height: between 0.115 inches and 0.125 inches .
Manufacturer part number NAS1578V3T30 for national stock number 5305014206725.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-420-6725.
-
MPN or Model
NAS1578V3T30
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 2.223 inches and 2.253 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.360 inches and 0.374 inches -
Head Height
Between 0.115 inches and 0.125 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 5940-01-470-3342 MPN NAS1063A6-510BDTerminal Board Marker Strip
- 1680-01-543-1557 MPN MS20253P2-2940LHeadless Straight Pin
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-008-5845 MPN NAS1632CE7Machine Screw
- 5305-00-054-4912 MPN NAS1635-02-18Machine Screw
- 5305-00-058-1538 MPN NAS662C0LL2Socket Head Cap Screw
- 5305-00-067-9912 MPN MS24667-17Socket Head Cap Screw
- 5305-00-104-2813 MPN NAS1352-8LE36PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-420-6725 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578V3T30 | National Aerospace Standards |
NAS1578V3T30 | National Aerospace Standards |
NAS1578V3T30 | National Aerospace Standards |
NAS1578V3T30 | National Aerospace Standards |
NAS1578V3T30 | National Aerospace Standards |
NAS1578V3T30 | National Aerospace Standards |