NSN 5305-01-421-2926
High Torque Screw
Between 2.388 inches and 2.418 inches fastener length, flat countersunk head style, between 0.464 inches and 0.506 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1580C4R32DP for national stock number 5305014212926.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-421-2926.
-
MPN or Model
NAS1580C4R32DP
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 2.388 inches and 2.418 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.506 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.250 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.277 inches first hole and 2.300 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-00-833-5836 MPN NAS1063A2-802Terminal Board Marker Strip
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5305-00-052-5922 MPN MS35198-68Machine Screw
- 5305-00-059-3674 MPN MS51958-78Machine Screw
- 5305-00-068-5838 MPN MS24678-36Socket Head Cap Screw
- 5305-00-147-3248 MPN MS51861-12CTapping Screw
- 5305-00-196-1270 MPN MS35308-449Hexagon Head Cap Screw
- 5305-00-205-3918 MPN MS27039-8-10Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-421-2926 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C4R32DP | National Aerospace Standards |
NAS1580C4R32DP | National Aerospace Standards |
NAS1580C4R32DP | National Aerospace Standards |
NAS1580C4R32DP | National Aerospace Standards |
NAS1580C4R32DP | National Aerospace Standards |
NAS1580C4R32DP | National Aerospace Standards |