NSN 5305-01-425-7217
High Torque Screw
Between 0.746 inches and 0.776 inches fastener length, flat countersunk head style, between 0.338 inches and 0.381 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number NAS7503-7 for national stock number 5305014257217.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-425-7217.
-
MPN or Model
NAS7503-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.746 inches and 0.776 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.338 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
80205-nas7503 professional/industrial association standard
More from these suppliers
- 5930-00-905-0685 MPN NAS1073-1Switch Guard
- 5940-00-243-7679 MPN NAS704S2Stud Terminal
- 5305-00-007-0287 MPN NAS1131C88PClose Tolerance Screw
- 5305-00-007-2979 MPN NAS1352-3-6Socket Head Cap Screw
- 5305-00-054-9242 MPN NASM24694-C101Machine Screw
- 5305-00-057-9593 MPN MS35199-25Machine Screw
- 5305-00-071-2098 MPN MS51958-88Machine Screw
- 5305-00-079-2588 MPN NAS1154-29Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-425-7217 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7503-7 | National Aerospace Standards |
NAS7503 | National Aerospace Standards |