NSN 5306-01-313-9049
Coaxial Connector
Between 3.785 inches and 3.815 inches fastener length, spline extended washer head style, between 0.552 inches and 0.572 inches head height, extended washer diameter: between 1.153 inches and 1.163 inches .
Manufacturer part number MS21134-10046 for national stock number 5306013139049.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-313-9049.
-
MPN or Model
MS21134-10046
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.900 inches and 0.950 inches -
Fastener Length
Between 3.785 inches and 3.815 inches -
Head Style
Spline extended washer -
Head Height
Between 0.552 inches and 0.572 inches -
Extended Washer Diameter
Between 1.153 inches and 1.163 inches -
Extended Washer Thickness
Between 0.080 inches and 0.100 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Head Minor Diameter
Between 0.673 inches and 0.688 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 2.865 inches and 2.885 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-395-3416 MPN ST3M455-5L13-1Close Tolerance Screw
- 5305-01-025-6961 MPN ST3M714-4D14Close Tolerance Screw
- 5305-01-613-2233 MPN PMT8704-12Close Tolerance Screw
- 5306-00-357-1895 MPN VAL23029-4-5Close Tolerance Bolt
- 5306-00-935-7528 MPN MS21250-05028Shear Bolt
- 5306-01-045-2417 MPN VAL23607-3-15Shoulder Bolt
- 5306-01-055-0161 MPN VCG0009-6-13Shear Bolt
- 5306-01-165-3307 MPN ST3M735-4-54Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-313-9049 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134-10046 | National Aerospace Standards |
MS21250-10046 | Arconic Global Fasteners & Rings, |
MS21250-10046 | Valley-todeco, Inc. |
MS21250-10046 | Sps Technologies, Llc |
MS21250-10046 | Huck International, Inc. |
MS21250-10046 | Sps Technologies, Llc |
MS21250-10046 | Sps Technologies, Llc |
MS21250-10046 | All Manufacturers, Inc. |
MS21250-10046 | Hi-shear Corporation |
MS21250-10046 | Textron Fastening Systems |
MS21250-10046 | Alcoa Global Fasteners, Inc. |
VFK100G-1046 | Valley-todeco, Inc. |
MS21250-10046 | Mercury Aerospace Fasteners Inc |
MS21250-10046 | Military Standards |
MS21134-10046 | Military Standards |