NSN 5305-01-435-3458
High Torque Screw
Between 2.0540 inches and 2.0840 inches fastener length, flat countersunk head style, between 0.809 inches and 0.892 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number BACB30LU7-22 for national stock number 5305014353458.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-435-3458.
-
MPN or Model
BACB30LU7-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
4.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
Between 2.0540 inches and 2.0840 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.809 inches and 0.892 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.4375 inches -
Grip Length
Between 1.3650 inches and 1.3850 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-356-1623 MPN LS15265V3-2Close Tolerance Screw
- 5305-00-484-1963 MPN LS15266V3-5Close Tolerance Screw
- 5305-01-365-1199 MPN BACB30NN6K44Close Tolerance Screw
- 5306-00-107-9246 MPN GB511GF5-6Shear Bolt
- 5306-01-046-1196 MPN VAL23033-5XD37Shoulder Bolt
- 5306-01-054-3415 MPN VCG0009-7-14Shear Bolt
- 5306-01-054-3427 MPN VCG0009L7-16Shear Bolt
- 5306-01-054-4597 MPN BAC30NE3H21Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-435-3458 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU7-22 | Huck International, Inc. |
BACB30LU7-22 | Sps Technologies, Llc |
BACB30LU7-22 | Valley-todeco, Inc. |
BACB30LU7-22 | Arconic Global Fasteners & Rings, |
BACB30LU7-22 | Federal Manufacturing Corporation |
BACB30LU7-22 | Sps Technologies, Llc |
BACB30LU7-22 | Sps Technologies, Llc |
BACB30LU7-22 | The Boeing Company |
BACB30LU7-22 | Huck Intl Inc |