NSN 5305-01-435-3850
High Torque Screw
Between 2.8665 inches and 2.8965 inches fastener length, flat countersunk head style, between 0.809 inches and 0.892 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number BACB30LU7-35 for national stock number 5305014353850.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-435-3850.
-
MPN or Model
BACB30LU7-35
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
Between 2.8665 inches and 2.8965 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.809 inches and 0.892 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.4375 inches -
Grip Length
Between 2.1775 inches and 2.1975 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-234-2564 MPN LD111-0044-2516Close Tolerance Screw
- 5305-01-508-3845 MPN 3M1169C6-10AClose Tolerance Screw
- 5305-01-600-8231 MPN PMT1123-7Close Tolerance Screw
- 5306-01-044-2979 MPN VAL23607-5D15Shoulder Bolt
- 5306-01-044-5187 MPN VAL23607-6D16Shoulder Bolt
- 5306-01-077-9727 MPN VFK101G12-037Shear Bolt
- 5306-01-141-7877 MPN ST3M507-4D5Shoulder Bolt
- 5306-01-142-3555 MPN VAL23608-4-70Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-435-3850 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU7-35 | Huck International, Inc. |
BACB30LU7-35 | Arconic Global Fasteners & Rings, |
BACB30LU7-35 | Sps Technologies, Llc |
BACB30LU7-35 | Valley-todeco, Inc. |
BACB30LU7-35 | Federal Manufacturing Corporation |
BACB30LU7-35 | Sps Technologies, Llc |
BACB30LU7-35 | Sps Technologies, Llc |
BACB30LU7-35 | The Boeing Company |
BACB30LU7-35 | Huck Intl Inc |
BACB30LU7-35 | Arconic Global Fasteners & Rings, |
BACB30LU7-35 | The Boeing Company |
BACB30LU7-35 | Sps Technologies, Llc |
BACB30LU7-35 | Valley-todeco, Inc. |
BACB30LU7-35 | Federal Manufacturing Corporation |
BACB30LU7-35 | Sps Technologies, Llc |
BACB30LU7-35 | Sps Technologies, Llc |
BACB30LU7-35 | Huck Intl Inc |
BACB30LU7-35 | Arconic Global Fasteners & Rings, |
BACB30LU7-35 | The Boeing Company |
BACB30LU7-35 | Sps Technologies, Llc |
BACB30LU7-35 | Valley-todeco, Inc. |
BACB30LU7-35 | Federal Manufacturing Corporation |
BACB30LU7-35 | Sps Technologies, Llc |
BACB30LU7-35 | Sps Technologies, Llc |
BACB30LU7-35 | Huck Intl Inc |