NSN 5305-01-435-3875
High Torque Screw
Between 2.9915 inches and 3.0215 inches fastener length, flat countersunk head style, between 0.809 inches and 0.892 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number BACB30LU7-37 for national stock number 5305014353875.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-435-3875.
-
MPN or Model
BACB30LU7-37
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
Between 2.9915 inches and 3.0215 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.809 inches and 0.892 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.4375 inches -
Grip Length
Between 2.3025 inches and 2.3225 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-345-1581 MPN LS15265V3-32Close Tolerance Screw
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-339-1417 MPN BACB30NT2K4Close Tolerance Screw
- 5305-01-413-2136 MPN VCL0009-5-28Close Tolerance Screw
- 5306-01-043-5720 MPN VEP220121-4FH14Shear Bolt
- 5306-01-045-2877 MPN VAL23608-6D20Shoulder Bolt
- 5306-01-045-5558 MPN VAL23608-4-25Shoulder Bolt
- 5306-01-050-4987 MPN C7521-3-8Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-435-3875 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU7-37 | Huck International, Inc. |
BACB30LU7-37 | The Boeing Company |
BACB30LU7-37 | Sps Technologies, Llc |
BACB30LU7-37 | Valley-todeco, Inc. |
BACB30LU7-37 | Arconic Global Fasteners & Rings, |
BACB30LU7-37 | Federal Manufacturing Corporation |
BACB30LU7-37 | Sps Technologies, Llc |
BACB30LU7-37 | Sps Technologies, Llc |
BACB30LU7-37 | Huck Intl Inc |
BACB30LU7-37 | The Boeing Company |
BACB30LU7-37 | Sps Technologies, Llc |
BACB30LU7-37 | Valley-todeco, Inc. |
BACB30LU7-37 | Arconic Global Fasteners & Rings, |
BACB30LU7-37 | Federal Manufacturing Corporation |
BACB30LU7-37 | Sps Technologies, Llc |
BACB30LU7-37 | Sps Technologies, Llc |
BACB30LU7-37 | Huck Intl Inc |
BACB30LU7-37 | The Boeing Company |
BACB30LU7-37 | Sps Technologies, Llc |
BACB30LU7-37 | Valley-todeco, Inc. |
BACB30LU7-37 | Arconic Global Fasteners & Rings, |
BACB30LU7-37 | Federal Manufacturing Corporation |
BACB30LU7-37 | Sps Technologies, Llc |
BACB30LU7-37 | Sps Technologies, Llc |
BACB30LU7-37 | Huck Intl Inc |