NSN 5305-01-435-6432
High Torque Screw
Between 1.223 inches and 1.253 inches fastener length, flat countersunk head style, between 0.257 inches and 0.304 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number NAS1581K3R14 for national stock number 5305014356432.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-435-6432.
-
MPN or Model
NAS1581K3R14
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 1.223 inches and 1.253 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.257 inches and 0.304 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.190 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response or ams4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 1680-01-532-3065 MPN NAS77A6-050NAirc Sleeve Bushing
- 1560-01-423-0213 MPN NAS6708D38Aircraft Structural Component Support
- 5305-00-007-3012 MPN AN565BC1032H10Setscrew
- 5305-00-008-9113 MPN NAS1190E02T4LSocket Head Cap Screw
- 5305-00-043-0442 MPN NAS662C2R12Machine Screw
- 5305-00-043-2678 MPN MS24694S92Machine Screw
- 5305-00-061-0042 MPN NAS1635-06-24PMachine Screw
- 5305-00-145-8351 MPN MS24694A3Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-435-6432 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581K3R14 | National Aerospace Standards |
NAS1581K3R14 | National Aerospace Standards |
NAS1581K3R14 | National Aerospace Standards |
NAS1581K3R14 | National Aerospace Standards |
NAS1581K3R14 | National Aerospace Standards |
NAS1581K3R14 | National Aerospace Standards |
NAS1581K3R14 | National Aerospace Standards |
NAS1581K3R14 | National Aerospace Standards |
NAS1581K3R14 | National Aerospace Standards |
NAS1581K3R14 | National Aerospace Standards |
NAS1581K3R14 | National Aerospace Standards |
NAS1581K3R14 | National Aerospace Standards |
NAS1581K3R14 | National Aerospace Standards |