NSN 5305-01-435-8326
High Torque Screw
Between 3.450 inches and 3.480 inches fastener length, flat countersunk head style, between 1.047 inches and 1.146 inches head diameter, grip diameter: between 0.5605 inches and 0.5615 inches .
Manufacturer part number BACB30LU9-42 for national stock number 5305014358326.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-435-8326.
-
MPN or Model
BACB30LU9-42
-
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.840 inches -
Fastener Length
Between 3.450 inches and 3.480 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.047 inches and 1.146 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.5625 inches -
Grip Length
Between 2.6150 inches and 2.6350 inches -
Thready Qty Per Inch (tpi)
18 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-484-1957 MPN LS15265V4-26Close Tolerance Screw
- 5305-01-129-5533 MPN ST3M454-3DL9Close Tolerance Screw
- 5305-01-412-7542 MPN VCL0009-4-34Close Tolerance Screw
- 5306-00-003-9388 MPN VFK100G-08052Shear Bolt
- 5306-00-085-3730 MPN MS21250-08022Shear Bolt
- 5306-00-126-5167 MPN BACB30LM10DU28Shear Bolt
- 5306-00-332-4561 MPN VAL23033-12-32Close Tolerance Bolt
- 5306-01-141-7883 MPN VAL23608-6-40Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-435-8326 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU9-42 | Huck International, Inc. |
BACB30LU9-42 | Valley-todeco, Inc. |
BACB30LU9-42 | Sps Technologies, Llc |
BACB30LU9-42 | Arconic Global Fasteners & Rings, |
BACB30LU9-42 | Federal Manufacturing Corporation |
BACB30LU9-42 | Sps Technologies, Llc |
BACB30LU9-42 | Sps Technologies, Llc |
BACB30LU9-42 | The Boeing Company |
BACB30LU9-42 | Huck Intl Inc |