NSN 5305-01-435-9972
High Torque Screw
Nutplate cbore between grip and thd/captive, panel fastener.
Manufacturer part number SC1752-4-8P for national stock number 5305014359972.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-435-9972.
-
MPN or Model
SC1752-4-8P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.365 inches -
Fastener Length
Between 0.980 inches and 1.010 inches -
Head Style
Flat countersunk -
Head Diameter
0.466 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty ii, cl 2 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-292-5487 MPN HT410A4-25Close Tolerance Screw
- 5305-01-008-4197 MPN HT4025L4-16Close Tolerance Screw
- 5305-01-131-6731 MPN HT4020-7-16-9AClose Tolerance Screw
- 5305-01-136-6122 MPN HT8137-5-15ASClose Tolerance Screw
- 5305-01-158-6248 MPN ST3M455-9DL45Close Tolerance Screw
- 5305-01-194-9177 MPN SC1777C08-7Machine Screw
- 5305-01-199-1334 MPN ST3M430V4-4ASClose Tolerance Screw
- 5305-01-202-8979 MPN BACB30LK3-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-435-9972 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1752-4-8P | Arconic Global Fasteners & Rings, |
123370-4-8P | Sps Technologies, Llc |
S00465-4-8P | Boeing Company, The |