NSN 5305-01-436-3863
High Torque Screw
Between 1.293 inches and 1.323 inches fastener length, flat countersunk head style, between 0.456 inches and 0.508 inches head diameter, grip diameter: between 0.2797 inches and 0.2807 inches .
Manufacturer part number NAS7604A15Y for national stock number 5305014363863.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-436-3863.
-
MPN or Model
NAS7604A15Y
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 1.293 inches and 1.323 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.456 inches and 0.508 inches -
Grip Diameter
Between 0.2797 inches and 0.2807 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.2500 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas4006 assn standard single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas7604 professional/industrial association standard
More from these suppliers
- 5935-01-613-0212 MPN MS31081R24-5PElectrical Plug Connector
- 5940-01-447-2283 MPN NAS1063B-9-14Terminal Board Marker Strip
- 5305-00-051-2327 MPN MS51958-96Machine Screw
- 5305-00-058-9359 MPN MS51977-10Setscrew
- 5305-00-083-1668 MPN NAS1102-08-6BMachine Screw
- 5305-00-097-4563 MPN NAS1100-04-8BMachine Screw
- 5305-00-149-9926 MPN NAS334A10Socket Head Cap Screw
- 5305-00-225-9450 MPN MS16995-70Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-436-3863 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7604A15Y | National Aerospace Standards |