NSN 5305-01-436-9724
High Torque Screw
2.136 inches fastener length, flat countersunk head style, between 0.951 inches and 1.013 inches head diameter, head height: 0.222 inches .
Manufacturer part number 106706T-8A22W for national stock number 5305014369724.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-436-9724.
-
MPN or Model
106706T-8A22W
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.761 inches -
Fastener Length
2.136 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.951 inches and 1.013 inches -
Head Height
0.222 inches -
Grip Diameter
Between 0.498 inches and 0.499 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
1.375 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment Specification
Nas4006 sermatal assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-606-2267 MPN CH138-4-10-2Aircraft Channel
- 5305-00-235-0340 MPN NAS1101E04-4Machine Screw
- 5305-00-235-5777 MPN NAS1101-3H18Machine Screw
- 5305-00-310-6062 MPN 106751-06-204CMachine Screw
- 5305-00-420-6456 MPN NAS1133V2Close Tolerance Screw
- 5305-00-469-3535 MPN SFT22-4A8Close Tolerance Screw
- 5305-00-574-0225 MPN 76122-3-4Machine Screw
- 5305-00-803-8194 MPN 51B222-11HMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-436-9724 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106706T-8A22W | Sps Technologies, Llc |