NSN 5305-01-437-0109
High Torque Screw
1.573 inches fastener length, flat countersunk head style, between 0.951 inches and 1.013 inches head diameter, head height: 0.222 inches .
Manufacturer part number 106706T8-13 for national stock number 5305014370109.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-437-0109.
-
MPN or Model
106706T8-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.761 inches -
Fastener Length
1.573 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.951 inches and 1.013 inches -
Head Height
0.222 inches -
Grip Diameter
Between 0.498 inches and 0.499 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
0.812 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response or mil-c-8837 ty2 cl2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-283-7456 MPN 110179-4-10ASClose Tolerance Screw
- 5305-00-587-3798 MPN 93741-P307Hexagon Head Cap Screw
- 5305-01-023-9052 MPN NAS1191-04T8BSocket Head Cap Screw
- 5305-01-043-1344 MPN 67077-06-4Machine Screw
- 5305-01-079-1372 MPN NAS1133E10Close Tolerance Screw
- 5305-01-121-8484 MPN 20098H3-8C-28Socket Head Cap Screw
- 5305-01-130-9017 MPN ST3M732-4L8Close Tolerance Screw
- 5305-01-132-4365 MPN HT4041-3-5-4Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-437-0109 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106706T8-13 | Sps Technologies, Llc |
106706T8-13 | Sps Technologies, Llc |
106706T8A13 | Sps Technologies, Llc |