NSN 5305-01-445-8847
High Torque Screw
Dry film lubricant-threads only.
Manufacturer part number 03A415-4-10L for national stock number 5305014458847.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-445-8847.
-
MPN or Model
03A415-4-10L
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.498 inches -
Fastener Length
Between 1.108 inches and 1.138 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.610 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
240000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Cobalt comp mp-35-n -
Material Specification
Ams 5844 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-328-5316 MPN 05A090-23Electrical Connector Backshell
- 1560-01-355-8346 MPN DAA3144A363-011Aircraft Access Door
- 5935-01-365-5910 MPN 05A169-1Electrical Connector Insert
- 4920-01-359-2911 MPN DAA7118P001-107Electrical-electronic Equipment Test Station
- 5305-01-445-6471 MPN 03A415-4-11LClose Tolerance Screw
- 5320-01-307-4656 MPN 03A089-6-28Solid Rivet
- 5320-01-328-1562 MPN 03A087-12-14Pin-rivet
- 5320-01-351-5627 MPN 03A134-12-8Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-445-8847 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A415-4-10L | Northrop Grumman Systems Corporation |
PBF1570-4-10L | Sps Technologies, Llc |