NSN 5305-01-452-1662
High Torque Screw
Oversize grip dia.
Manufacturer part number LD111-0045-2418 for national stock number 5305014521662.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-452-1662.
-
MPN or Model
LD111-0045-2418
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.397 inches -
Fastener Length
Between 1.507 inches and 1.537 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.506 inches -
Grip Diameter
Between 0.2646 inches and 0.2651 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
1.125 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5306-00-085-3730 MPN MS21250-08022Shear Bolt
- 5306-00-708-7672 MPN VAL21013-12040Shear Bolt
- 5306-01-043-7711 MPN VAL22034-4G15Shear Bolt
- 5306-01-051-6035 MPN C4356N4D1400Shoulder Bolt
- 5306-01-131-8458 MPN VAL22034-6F8Shear Bolt
- 5306-01-160-7560 MPN BACB30NE4-21Close Tolerance Bolt
- 5306-01-349-4182 MPN VCC0090-7H22Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-452-1662 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0045-2418 | Boeing Company, The |
LD111-0045-2418 | Sps Technologies, Llc |
LD111-0045-2418 | Sps Technologies, Llc |
LD111-0045-2418 | Sonic Industries Inc. |
LD111-0045-2418 | Valley-todeco, Inc. |
LD111-0045-2418 | Sps Technologies, Llc |
LD111-0045-2418 | Hi-shear Corporation |
LD111-0045-2418 | Sps Technologies, Llc |