NSN 5305-01-454-3898
High Torque Screw
Between 1.159 inches and 1.206 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number VCL0009-4D12 for national stock number 5305014543898.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-454-3898.
-
MPN or Model
VCL0009-4D12
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 1.159 inches and 1.206 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.065 inches first hole and 0.075 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.818 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6961 MPN ST3M714-4D14Close Tolerance Screw
- 5305-01-105-9372 MPN 3M926-3L13Close Tolerance Screw
- 5305-01-591-0150 MPN ST3M557-10-12Close Tolerance Screw
- 5306-00-038-2452 MPN BACB30LM9DU-41Machine Bolt
- 5306-00-357-1907 MPN VAL23029-9D19Close Tolerance Bolt
- 5306-00-438-8681 MPN MS21250-10048Shear Bolt
- 5306-01-005-0472 MPN VAL23029-4-14Close Tolerance Bolt
- 5306-01-141-7884 MPN VAL23608-7-40Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-454-3898 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCL0009-4D12 | Valley-todeco, Inc. |
PBF1475-4D12 | Sps Technologies, Llc |
124379-4D12 | Sps Technologies, Llc |
GB510FG4D12 | Northrop Grumman Systems Corporation |
Stock Check
- NE: 27