NSN 5305-01-472-5295
High Torque Screw
Flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, between 0.2485 inches and 0.2495 inches grip diameter, single shear strength: 132000 pounds per square inch.
Manufacturer part number PBF1570T4-33L for national stock number 5305014725295.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-472-5295.
-
MPN or Model
PBF1570T4-33L
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
End Application
Outboard mate -
Thread Diameter
0.250 inches -
Grip Length
Between 2.063 inches and 2.073 inches -
Features Provided
Dry film lubricant -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
240000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-551-4842 MPN HT4025L4-11Close Tolerance Screw
- 5305-01-103-8817 MPN 3M926-3L4Close Tolerance Screw
- 5305-01-198-5562 MPN PBF1356C08-6Machine Screw
- 5305-01-330-7580 MPN PBF1484-4-12AClose Tolerance Screw
- 5305-01-412-8686 MPN PBF1475-5-29Close Tolerance Screw
- 5305-01-477-5959 MPN TX1027V4-6AClose Tolerance Screw
- 5305-01-478-8174 MPN TX1026D4-12AClose Toleran Screw
- 5305-01-667-2941 MPN BACB30NN3K6YClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-472-5295 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1570T4-33L | Sps Technologies, Llc |