NSN 5305-01-473-8581
High Torque Screw
Between 1.271 inches and 1.291 inches fastener length, flat countersunk head style, between 0.7170 inches and 0.7604 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number 802139 for national stock number 5305014738581.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-473-8581.
-
MPN or Model
802139
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.569 inches and 0.619 inches -
Fastener Length
Between 1.271 inches and 1.291 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.7170 inches and 0.7604 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.677 inches and 0.697 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
16000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Ams4967, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5305-01-447-6589 MPN TX1027V4-16AClose Tolerance Screw
- 5305-01-512-8284 MPN TX1026C4-10AFClose Tolerance Screw
- 5305-01-512-8325 MPN TX1027C5-14AFClose Tolerance Screw
- 5305-01-526-6637 MPN TX1027V4-14AClose Tolerance Screw
- 5306-01-046-1185 MPN 109453-3-17YShoulder Bolt
- 5306-01-541-4120 MPN TX1027E4D10XAClose Tolerance Bolt
- 5320-01-137-9053 MPN HLT52YC-8-5Pin-rivet
- 5320-01-143-5090 MPN HLT253TB-12-9Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-473-8581 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
802139 | Naval Air Warfare Center |
802139-6-11 | Naval Air Warfare Center |
802139-6-11 | Sps Technologies, Llc |
639AS10746 | Naval Air Systems Command |
B02139-6-11 | Sps Technologies Inc |
639AS10190 | Naval Air Systems Command |
B02139-6-11 | Sps Technologies, Llc |