NSN 5305-01-477-5619
High Torque Screw
Flat countersunk undercut head style, between 0.502 inches and 0.507 inches head diameter, between 0.071 inches and 0.073 inches head height, internal drive style: high-torque.
Manufacturer part number HT4020-4-11A for national stock number 5305014775619.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-477-5619.
-
MPN or Model
HT4020-4-11A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.510 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.502 inches and 0.507 inches -
Head Height
Between 0.071 inches and 0.073 inches -
Internal Drive Style
High-torque -
End Application
Fighter aircraft-first (f18 e/f) -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Criticality Code Justification
Agav -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-109-5463 MPN BACB30LU4-4Close Tolerance Screw
- 5305-01-512-8368 MPN 3M1170D4-4AClose Tolerance Screw
- 5305-01-568-0715 MPN HT 4025L6-20Close Tolerance Screw
- 5306-00-152-5509 MPN VAL23602-8DS024Close Tolerance Bolt
- 5306-00-754-1757 MPN BACB30FD4-20Shear Bolt
- 5306-00-958-5365 MPN MS2125009022Shear Bolt
- 5306-01-046-0512 MPN VAL23608-5-7Shoulder Bolt
- 5306-01-049-4027 MPN VAL23033-6-16Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-477-5619 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-4-11A | Hi-shear Corporation |
HT4020-4-11A | Lisi Aerospace Canada Corp |
ST3M652C4-11A | Boeing Company, The |
11925C4-11A | Reid Products Inc. |
HT4020-4-11A | Sps Technologies Inc |
ST3M652C4-11A | Valley-todeco, Inc. |
HT4020-4-11A | Sps Technologies, Llc |
HT4020-4-11A | Arconic Global Fasteners & Rings, |
ST3M652C4-11A | Heartland Precision Fasteners, Inc. |
HT4020-4-11A | Huck International, Inc. |
HT4020-4-11A | Sps Technologies, Llc |
HT4020-4-11A | Sps Technologies, Llc |
ST3M652C4-11A | Fastener Innovation Technology, Inc. |
HT4020-4-11A | Sps Technologies, Llc |
HT4020-4-11A | Alcoa Global Fasteners, Inc. |
HT4020-4-11A | Sps Technologies Ltd Tj Brooks |
ST3M652C4-11A | Houston Precision Fasteners I, Lp |
WC4020-4-11A | West Coast Aerospace Inc |