NSN 5305-01-480-4926
High Torque Screw
1.3125 inches fastener length, pan head style, between 0.260 inches and 0.374 inches head diameter, head height: between 0.115 inches and 0.125 inches .
Manufacturer part number NAS1578C3T21P for national stock number 5305014804926.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-480-4926.
-
MPN or Model
NAS1578C3T21P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Length
0.363 inches -
Fastener Length
1.3125 inches -
Head Style
Pan -
Head Diameter
Between 0.260 inches and 0.374 inches -
Head Height
Between 0.115 inches and 0.125 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.9495 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3180 pounds per square inch -
Material
Stainless steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 5935-00-180-2603 MPN NAS1650-106SNFElectrical Receptacle Connector
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5305-00-008-3700 MPN NAS1191C04P6LSocket Head Cap Screw
- 5305-00-012-8226 MPN MS51851-136Tapping Screw
- 5305-00-052-1457 MPN MS35308-303Hexagon Head Cap Screw
- 5305-00-052-6683 MPN MS35198-34Machine Screw
- 5305-00-059-3665 MPN MS51958-69Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-480-4926 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578C3T21P | National Aerospace Standards |