NSN 5305-01-482-3305
High Torque Screw
1.073 inches fastener length, round wedge head style, between 0.296 inches and 0.331 inches head diameter, head height: 0.072 inches .
Manufacturer part number NAS7502U12 for national stock number 5305014823305.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-482-3305.
-
MPN or Model
NAS7502U12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
1.073 inches -
Head Style
Round wedge -
Head Diameter
Between 0.296 inches and 0.331 inches -
Head Height
0.072 inches -
Grip Diameter
Between 0.1630 inches and 0.1635 inches -
Internal Drive Style
Cross recess type 1 -
End Application
C-17 acft -
Thread Diameter
0.164 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, shear -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjc
More from these suppliers
- 5940-01-425-7410 MPN NAS1063A11-314Terminal Board Marker Strip
- 5305-00-003-8162 MPN NAS1352-6-44PSocket Head Cap Screw
- 5305-00-081-9923 MPN NAS1189-3P8LSocket Head Cap Screw
- 5305-00-082-1760 MPN MS21287-02Machine Screw
- 5305-00-099-7629 MPN NAS1580A3H7DClose Tolerance Screw
- 5305-00-104-2812 MPN NAS1352-8LE12PSocket Head Cap Screw
- 5305-00-144-0368 MPN NAS1189-4P14Machine Screw
- 5305-00-159-5547 MPN NAS1101E04-6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-482-3305 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7502U12 | National Aerospace Standards |