NSN 5305-01-485-6593
Tap Bolt
Between 2.156 inches and 2.250 inches fastener length, hexagon head style, between 0.378 inches and 0.403 inches head height, width between flats: between 0.922 inches and 0.937 inches .
Manufacturer part number MS51491-062 for national stock number 5305014856593.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-485-6593.
-
MPN or Model
MS51491-062
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.500 inches -
Fastener Length
Between 2.156 inches and 2.250 inches -
Head Style
Hexagon -
Head Height
Between 0.378 inches and 0.403 inches -
Width Between Flats
Between 0.922 inches and 0.937 inches -
End Application
Interconnection -
Thread Diameter
0.625 inches -
Nonstandard Thread Pitch Diameter
+0.5589/+0.5644 inches -
Thready Qty Per Inch (tpi)
11 -
Material
Steel -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-065-4583 MPN MS3102A36-15SXElectrical Receptacle Connector
- 5905-00-116-8566 MPN MS35043-59Composition Fixed Resistor
- 5935-00-137-0962 MPN MS3107A20-33SElectrical Plug Connector
- 5905-00-171-2002 MPN MS35043-5Composition Fixed Resistor
- 5935-00-197-3916 MPN MS27506B8-2Electrical Connector Cable Clamp
- 5940-00-204-8966 MPN M25036-102Lug Terminal
- 5905-00-246-9396 MPN MS35043-191Composition Fixed Resistor
- 5935-00-259-6920 MPN MS3100C22-27PElectrical Receptacle Connector
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-485-6593 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS51491-062 | Military Standards |