NSN 5305-01-488-3744
High Torque Screw
Drive style is: radial-slot recess/ fairchild aerospace, not listed this fiig. Bored hole, threaded end, 0.130 in dia, 0.620 in dp; wire form hold out spring inserted; 2 lead thread..
Manufacturer part number CA21351-6-16RS for national stock number 5305014883744.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-488-3744.
-
MPN or Model
CA21351-6-16RS
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.665 inches and 0.804 inches -
Fastener Length
2.035 inches -
Head Style
Flat countersunk -
Head Diameter
0.672 inches -
Locking Feature
Detent ring locking feature -
Grip Diameter
0.374 inches -
Point Length
0.100 inches -
Point Diameter
Between 0.330 inches and 0.335 inches -
Single Shear Strength
9400 pounds per square inch -
Point Style
Chamfer dog -
End Application
F-22 raptor -
Thread Diameter
0.375 inches -
Grip Length
Between 1.131 inches and 1.270 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
7360 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 100.0 degrees -
Point Chamfer Angle
45.0 degrees -
Part Name Assigned By Controlling Agency
Stud bolt -
Material
Iron alloy 660 -
Material Specification
Ams 5731 national std/spec 1st material response or ams 5737 national std/spec 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams qq-p-35 national std/spec all treatment responses -
Supplementary Features
Stud bolts shall have polyproplene head protective ring installed for shipping, customer to remove before installing -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-080-9263 MPN 3MA584-16Machine Screw
- 5305-00-147-4750 MPN NAS1189E3P14NSocket Head Cap Screw
- 5305-00-308-1806 MPN HT4028L7-9Close Tolerance Screw
- 5305-00-340-2873 MPN LS15234-C3-7Close Tolerance Screw
- 5305-00-369-1710 MPN HT1029A4-7Close Tolerance Screw
- 5305-00-369-1767 MPN HT4024L3-6Close Tolerance Screw
- 5305-00-916-4822 MPN NAS1124-8HClose Tolerance Screw
- 5305-00-928-7087 MPN NAS1124-6HClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-488-3744 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA21351-6-16RS | Alcoa Global Fasteners, Inc. |