NSN 5305-01-488-3747
High Torque Screw
Drive style is: radial-slot recess/ fairchild areospace, not listed this fiig. Bored hole, threaded end, 0.130 in dia, 0.620 in dp; wire form hold-out spring inserted; 2 lead thread..
Manufacturer part number CA21351-6-14RS for national stock number 5305014883747.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-488-3747.
-
MPN or Model
CA21351-6-14RS
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.665 inches and 0.804 inches -
Fastener Length
1.895 inches -
Head Style
Flat countersunk -
Head Diameter
0.672 inches -
Locking Feature
Detent ring locking feature -
Grip Diameter
0.374 inches -
Point Length
0.100 inches -
Point Diameter
Between 0.330 inches and 0.335 inches -
Single Shear Strength
9400 pounds per square inch -
Point Style
Chamfer dog -
End Application
F-22 raptor -
Thread Diameter
0.375 inches -
Grip Length
Between 0.991 inches and 1.130 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
7360 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 100.0 degrees -
Point Chamfer Angle
45.0 degrees -
Part Name Assigned By Controlling Agency
Stud bolt -
Material
Iron alloy 660 -
Material Specification
Ams 5731 national std/spec 1st material response or ams 5737 national std/spec 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams qq-p-35 national std/spec all treatment responses -
Supplementary Features
Stud bolts shall have polyproplene head protective ring installed for shipping, customer to remove ring before installing -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-081-6301 MPN 3MA585-16Machine Screw
- 5305-00-341-7397 MPN NAS1189E04T5Socket Head Cap Screw
- 5305-00-901-6300 MPN NAS1101-06H5Machine Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
- 5305-01-067-2418 MPN VT1694F4-3Close Tolerance Screw
- 5305-01-103-8817 MPN HT4068-3-4AClose Tolerance Screw
- 5305-01-135-1132 MPN NAS1221-06-16Machine Screw
- 5305-01-141-7902 MPN HT4020-4-17YShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-488-3747 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA21351-6-14RS | Alcoa Global Fasteners, Inc. |