NSN 5305-01-495-9635
High Torque Screw
Between 0.551 inches and 0.581 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1154E4P for national stock number 5305014959635.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-495-9635.
-
MPN or Model
NAS1154E4P
-
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.551 inches and 0.581 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas1154 professional/industrial association standard
More from these suppliers
- 5305-00-004-0374 MPN NAS1351-4H8Socket Head Cap Screw
- 5305-00-052-6885 MPN MS35198-45Machine Screw
- 5305-00-053-1080 MPN MS35199-43Machine Screw
- 5305-00-068-5410 MPN MS16995-2Socket Head Cap Screw
- 5305-00-086-9074 MPN NAS1081-06B5LSetscrew
- 5305-00-103-2072 MPN NASM35307 P/N MS35307 -419Hexagon Head Cap Screw
- 5305-00-186-4998 MPN NAS1352-8-28Socket Head Cap Screw
- 5305-00-234-9732 MPN NAS1190E4P8NSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-495-9635 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1154E4P | National Aerospace Standards |