NSN 5305-01-521-5771
High Torque Screw
Item has drilled threads.
Manufacturer part number ST3M557-3D4 for national stock number 5305015215771.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-521-5771.
-
MPN or Model
ST3M557-3D4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
0.671 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Head Height
0.013 inches -
Grip Diameter
Between 0.189 inches and 0.190 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.250 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
99.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-211-8488 MPN HT409A4-9Shoulder Screw
- 5305-00-508-3087 MPN LS15264V04-7Machine Screw
- 5305-00-812-4880 MPN 51B334-16Machine Screw
- 5305-01-047-0482 MPN HT4011-6-13Close Tolerance Screw
- 5305-01-132-2176 MPN ST3M466V5L11-1Close Tolerance Screw
- 5305-01-158-6770 MPN HT4057-4-16AClose Tolerance Screw
- 5305-01-160-1959 MPN 3M893-4-2Machine Screw
- 5305-01-282-2654 MPN SC1723-4-317Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-521-5771 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M557-3D4 | Boeing Company, The |
11923-3D4 | Reid Products Inc. |
HT4027-3D4 | Arconic Global Fasteners & Rings, |
HT4027-3D4 | Sps Technologies, Llc |
Stock Check
- NE: 25