NSN 5305-01-532-3058
High Torque Screw
Between 12.985 inches and 13.015 inches fastener length, flat countersunk head style, 0.350 inches head diameter, grip diameter: between 0.248 inches and 0.249 inches .
Manufacturer part number BACS12JC4A13 for national stock number 5305015323058.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-532-3058.
-
MPN or Model
BACS12JC4A13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 12.985 inches and 13.015 inches -
Head Style
Flat countersunk -
Head Diameter
0.350 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Internal Drive Style
Torx -
Thread Diameter
0.250 inches -
Grip Length
Between 0.402 inches and 0.422 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-069-5215 MPN AIC811-4-33Socket Head Cap Screw
- 5305-00-389-9336 MPN HT4024L4-14Close Tolerance Screw
- 5305-00-821-6028 MPN NAS1102-02-4Machine Screw
- 5305-01-158-5372 MPN AIC940-3-12Machine Screw
- 5305-01-161-6165 MPN AIC4040V4-04RClose Tolerance Screw
- 5305-01-216-6614 MPN LE111-0041-2409Close Tolerance Screw
- 5305-01-333-2719 MPN AIC1652-4-13Close Tolerance Screw
- 5305-01-333-6304 MPN AIC1701-4-9Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-532-3058 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACS12JC4A13 | The Boeing Company |
BACS12JC4A13 | Sps Technologies, Llc |
BACS12JC4A13 | Heartland Precision Fasteners, Inc. |
BACS12JC4A13 | Pilgrim Screw Corporation |