NSN 5305-01-538-8107
High Torque Screw
Between 0.723 inches and 0.753 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.2041 inches and 0.2051 inches .
Manufacturer part number C7985-3D6R for national stock number 5305015388107.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-538-8107.
-
MPN or Model
C7985-3D6R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.276 inches and 0.388 inches -
Fastener Length
Between 0.723 inches and 0.753 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.2041 inches and 0.2051 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
22000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.583 inches first hole and 0.613 inches first hole -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-235-0340 MPN NAS1101E04-4Machine Screw
- 5305-00-245-4631 MPN AIC813-3R10Machine Screw
- 5305-00-310-5236 MPN AIC811-06-11Socket Head Cap Screw
- 5305-01-085-6757 MPN AIC811-06-15Socket Head Cap Screw
- 5305-01-109-5463 MPN BACB30LU4-4Close Tolerance Screw
- 5305-01-116-3085 MPN NAS1101-06H3Machine Screw
- 5305-01-254-2565 MPN 3M963-4L8Close Tolerance Screw
- 5305-01-329-9952 MPN AIC4463-3-14Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-538-8107 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C7985-3D6R | Lockheed Martin Corporation |
C7985-3D6R | Sps Technologies, Llc |
C7985-3D6R | Arconic Global Fasteners & Rings, |
C7985-3D6R | Saturn Fasteners Inc |
C7985-3D6R | Huck International, Inc. |
C7985-3D6R | Sps Technologies, Llc |
C7985-3D6R | Sps Technologies, Llc |
C7985-3D6R | Sps Technologies, Llc |
C7985-3D6R | Alcoa Global Fasteners, Inc. |