NSN 5305-01-543-2023
High Torque Screw
0.838 inches fastener length, flat countersunk head style, 0.339 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number NAS1083V9 for national stock number 5305015432023.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-543-2023.
-
MPN or Model
NAS1083V9
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
0.838 inches -
Head Style
Flat countersunk -
Head Diameter
0.339 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
0.562 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5935-00-153-4395 MPN NAS1642R16-24SNElectrical Receptacle Connector
- 5305-00-008-5892 MPN NAS1102E08-30Machine Screw
- 5305-00-050-9223 MPN MS24667-45Socket Head Cap Screw
- 5305-00-057-0504 MPN MS51958-7Machine Screw
- 5305-00-058-9364 MPN MS51977-21Setscrew
- 5305-00-069-5585 MPN MS90725-101Hexagon Head Cap Screw
- 5305-00-140-8028 MPN MS18064-62Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-543-2023 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1083V9 | National Aerospace Standards |