NSN 5305-01-561-5461
High Torque Screw
0.801 inches fastener length, flat countersunk head style, 0.339 inches head diameter, grip diameter: 0.205 inches .
Manufacturer part number NAS1580V3T7X for national stock number 5305015615461.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-561-5461.
-
MPN or Model
NAS1580V3T7X
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
0.801 inches -
Head Style
Flat countersunk -
Head Diameter
0.339 inches -
Grip Diameter
0.205 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
Aircraft, b-2 -
Thread Diameter
0.190 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Close tolerance screw -
Material
Titanium alloy -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-562-2594 MPN HST12AY5-7Materi Aircraft Pin
- 5305-00-227-1249 MPN HT42N10Shoulder Screw
- 5305-00-505-3442 MPN LS15237C3-3Close Tolerance Screw
- 5305-00-613-8274 MPN HT4028L4-24Close Tolerance Screw
- 5305-00-811-6603 MPN 53B334-7Machine Screw
- 5305-00-952-5727 MPN HT7A23Machine Screw
- 5305-00-957-5208 MPN HT6U19Machine Screw
- 5305-01-019-0842 MPN HT4036-4-32Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-561-5461 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V3T7X | National Aerospace Standards |
NAS1580V3T7X | Hi-shear Corporation |
NAS1580V3T7X | Lisi Aerospace Canada Corp |