NSN 5305-01-589-9564
High Torque Screw
1.689 inches fastener length, fillister countersunk head style, 0.578 inches head diameter, head height: 0.015 inches .
Manufacturer part number NAS1580V5R19X for national stock number 5305015899564.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-589-9564.
-
MPN or Model
NAS1580V5R19X
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
1.689 inches -
Head Style
Fillister countersunk -
Head Diameter
0.578 inches -
Head Height
0.015 inches -
Grip Diameter
Between 0.327 inches and 0.328 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.313 inches -
Grip Length
1.188 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
9260 pounds per square inch -
Countersink Angle
Between 99.9 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, shear, 100 degrees flush head, offset cruciform, 95 ksi fsu -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-443-8936 MPN NAS1063A5-199HTerminal Board Marker Strip
- 1560-01-623-8875 MPN 520-14948-3Aircraft Stringer
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-021-4124 MPN MS35308-370Hexagon Head Cap Screw
- 5305-00-031-0660 MPN NAS1132-9Close Tolerance Screw
- 5305-00-151-2024 MPN MILS7839Machine Screw
- 5305-00-173-8424 MPN NAS1216-08E7Machine Screw
- 5305-00-205-3917 MPN MS27039-8-08Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-589-9564 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V5R19X | National Aerospace Standards |