NSN 5305-01-618-7124
High Torque Screw
1.050 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.2041 inches and 0.2051 inches .
Manufacturer part number VT10021-3-11R for national stock number 5305016187124.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-618-7124.
-
MPN or Model
VT10021-3-11R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
1.050 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.2041 inches and 0.2051 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F16 -
Thread Diameter
0.190 inches -
Grip Length
0.687 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt 100 degrees reduced hd offset cruciform 132 ksi min shr -
Material
Steel comp h11 -
Material Specification
Ams 6487 national std/spec single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 national std/spec single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-046-9975 MPN BACB30LU2-4Close Tolerance Screw
- 5305-01-135-1154 MPN LS15266V4-13Close Tolerance Screw
- 5305-01-215-5793 MPN LD111-0044-2412Close Tolerance Screw
- 5306-00-505-9796 MPN J646P22AMachine Bolt
- 5306-01-054-3413 MPN VCG0009-6-10Shear Bolt
- 5306-01-056-5443 MPN BACB30LM5-15Shear Bolt
- 5306-01-067-8530 MPN VAL23033-4H44Shear Bolt
- 5306-01-132-4786 MPN VFK600-7H16FShear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-618-7124 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VT10021-3-11R | Valley-todeco, Inc. |
AIC618-3-11R | Sps Technologies, Llc |
SF116-3-11R | Saturn Fasteners Inc |
GS1009-3-11R | B & B Specialties Inc. |
93926-3-11X | Sps Technologies, Llc |
93926-3-11X | Sps Technologies, Llc |
C20645-3-11R | Lockheed Martin Corporation |
C20645-3-11R | B & B Specialties, Inc |
GS1009-3-11R | B & B Specialties, Inc |