NSN 5305-01-625-0888
High Torque Screw
Between 1.548 inches and 1.578 inches fastener length, flat countersunk head style, between 0.429 inches and 0.477 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS8605D18 for national stock number 5305016250888.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-625-0888.
-
MPN or Model
NAS8605D18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.548 inches and 1.578 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.477 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches and 0.081 inches all holes -
Internal Drive Style
Cruciform ribbed -
Thread Diameter
0.3125 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Ams6382 assn standard 1st material response or ams6415 assn standard 2nd material response or ams6484 assn standard 2nd material response or ams6322 assn standard 3rd material response or ams6325 assn standard 3rd material response or ams6327 assn standard 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type 2, class 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-008-9119 MPN NAS1190C04T22LSocket Head Cap Screw
- 5305-00-023-7577 MPN NAS1191C04P7Socket Head Cap Screw
- 5305-00-052-3538 MPN NAS608-632-12Socket Head Cap Screw
- 5305-00-052-8902 MPN MS24630-56Tapping Screw
- 5305-00-074-4518 MPN NAS1156-21Machine Screw
- 5305-00-138-9907 MPN NAS1133V34Close Tolerance Screw
- 5305-00-141-7146 MPN NAS1191E4P10Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-625-0888 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS8605D18 | National Aerospace Standards |