NSN 5305-01-644-1356
High Torque Screw
0.651 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number NAS1133V6A for national stock number 5305016441356.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-644-1356.
-
MPN or Model
NAS1133V6A
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
0.651 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
32 -
Part Name Assigned By Controlling Agency
Screw machine-pan head, close tolerance -
Material
Titanium alloy uns r54520 -
Surface Treatment
Aluminum -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-156-7196 MPN NASM77072Lug Terminal
- 1680-01-541-9616 MPN NAS312C26-1215Control Cable Assembly
- 5940-01-652-3069 MPN NAS1063A2-107DNTerminal Board Marker Strip
- 5305-00-007-6201 MPN NAS1102E04-9Machine Screw
- 5305-00-057-0528 MPN MS51958-46Machine Screw
- 5305-00-069-5568 MPN MS90725-80Hexagon Head Cap Screw
- 5305-00-079-7969 MPN MS24694S218Machine Screw
- 5305-00-082-6735 MPN MS51959-119Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-644-1356 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1133V6A | National Aerospace Standards |