NSN 5306-00-097-4840
Coaxial Connector
Between 1.280 inches and 1.327 inches fastener length, double hexagon head style, 0.187 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number BM17021-5-15 for national stock number 5306000974840.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-097-4840.
-
MPN or Model
BM17021-5-15
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Length
Between 0.332 inches and 0.399 inches -
Fastener Length
Between 1.280 inches and 1.327 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Part Name Assigned By Controlling Agency
Navy special project -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-638-8677 MPN BACB30LH3U19Machine Screw
- 5305-01-141-7905 MPN ST3M653C6-20AShoulder Screw
- 5305-01-436-2386 MPN BACB30LH3-9Close Tolerance Screw
- 5305-01-519-8247 MPN BACS12ER3K20Machine Screw
- 5306-00-205-3700 MPN ACB30NE6H18Close Tolerance Bolt
- 5306-00-288-2196 MPN VAL23033-3-4Shear Bolt
- 5306-00-935-7528 MPN MS21250-05028Shear Bolt
- 5306-01-026-5776 MPN VAL22034-7F28Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-097-4840 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM17021-5-15 | Huck Intl Inc |
VEPS156121-5-15 | Valley-todeco, Inc. |
EWSB26-5A15 | Sps Technologies, Llc |
VS2106-5-15 | Alcoa Global Fasteners, Inc. |
GB511C5-15 | Northrop Grumman Systems Corporation |
EWSB26-5A15 | Sps Technologies Inc |
BM17021-5-15 | Huck International, Inc. |
EWSB26-5A15 | Sps Technologies, Llc |
GB511C5-15 | Northrop Grumman Systems Corporation |
VS2106-5-15 | Alcoa Global Fasteners, Inc. |
EWSB26-5A15 | Sps Technologies Inc |